Know the name and type of system you currently have before calling someone to fix it. This will enable you can give your chosen contractor all the information they need.
Know what you need before you select an HVAC contractor. It will be hard for a contractor to give you a price estimate on the phone if they have not seen your current system. It will be more difficult for him to assist you can't figure out what they need to do.
Clean the debris on your condenser unit. You don't know when things are going to pile up, especially after a windy or rainy storm, and that can throw a wrench in your system. It can cause a disaster with your unit.
Turn the power off first so you don't get hurt or break something. Next, pop off the grill, put the blades out and start to gently clean them along with the unit.
Don't get grass clippings on your outdoor condenser.Aim your grass clippings in the other direction. This also applies to leaf blowing and any other yard work that results in the yard.
Leaves falling from trees can damage your HVAC unit. Make sure the fan's grill is cleaned often once nearby trees start shedding their leaves. The fan needs unobstructed air flow, and if debris is blocking this air flow, it could cause your system to break down.
Put your outdoor units in the shade if you are installing them.
Be sure you have twice annual HVAC unit in your home checked about two times every year. This should be checked often for debris and the spring.
Turn off your outdoor condenser units when it becomes cold out. This should turn it off to prevent damage if the temperature drops below 60ºF to avoid damage. This can keep your system working well throughout the years without the cost of repairs.
Learning about HVAC systems will require some personal motivation, but you'll be glad that you did once it's all through. It is important to always use caution when working with your HVAC unit, as the wrong information can do more harm than good. You should now be on your way to everything working out correctly! Heating & Air Repair
Source: Park Mechanical Heating & Air
No comments:
Post a Comment